Browse by purpose
- Primer products »
- Wall and ceiling products »
- Trim products »
- Exterior products »
- Specialist products »
- Dulux Trade Woodcare »
- Waste management products »
1L, 2.5L, 5L
PBW & more than 12000 colours
A solvent-based, fully VOC 2010 compliant gloss for interior and exterior wood and metal surfaces where a tough and durable high gloss finish is required. Up to 18m² per litre on sealed surfaces.
To get the best results make sure surfaces to be painted are sound, clean and dry. New surfaces particularly must be fully dry.
Apply 1 coat of the appropriate coloured Dulux Trade undercoat, followed by 1 or 2 coats of Dulux Trade High Gloss. Allow a minimum of 6 to 16 hours for the undercoat to dry before applying the gloss finish. Where a second coat of High Gloss is required, allow a minimum of 16 hours between coats.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
If you are registered on www.icipaints.co.uk, you can already log-in using the same information to access this sites, and so you do not need to register again.
By joining us, your email address and password will enable you to log in to any ICI Paints AkzoNobel Trade website. That means only one password to remember for all our sites.
If you have forgotten your password, please enter the email address you used to register for this site in the box below and click the Submit button.
Your password will then be automatically emailed to you.