Dulux Trade
Dulux Trade Weathershield Quick Drying Satin
Formulation
Water-based
Pack sizes
1L, 2.5L
Colour range
Over 620 colours
A water-based, mid-sheen finish which is part of a system specially developed by ICI for Dulux Trade to give long lasting protection. The results of ICI's tests show that the Weathershield Exterior Quick Drying Satin system will provide extensive protection for up to six years if correctly applied.
Application information
- Coverage
- 20m² per litre
- Touch dry
- 1-2 hours dependent upon temperature / humidity
- Recoatable
- 2-4 hours
- Thinning:
- This product should not be thinned.
Key benefits
- Provides a fashionable satin finish.
- quick-drying and easy to apply.
- Up to 6 years lasting protection.
- Contains fungicide to help protect against the disfiguring effect of mould growth on its film.
System information
Surfaces must be sound, clean and dry before treating.
Remove all loose and defective coatings, if necessary stripping back to bare wood.
Prime all bare wood with 1 coat of Weathershield Exterior Preservative Primer including any new or bare replacement beading. Excess primer should be wiped off surrounding paintwork. Prime any bare metal with 1 coat of Dulux Trade Metal Primer.
Apply 1 coat of the appropriate coloured Weathershield Exterior Flexible Undercoat to all primed wood.
Apply a second coat of Weathershield Exterior Flexible Undercoat overall, followed by 1 coat of Weathershield Exterior Quick Drying Satin. Where a strong colour change is involved, 2 coats may be required. Allow a minimum of 2 hours before overcoating Weathershield Exterior Flexible Undercoat.
After use, remove as much paint as possible from brushes before cleaning with clean water.
How much will I need?
Use our handy paint calculator to work out how much you need to get your job done.
